The CSI MK III Tablet Coating Spray Nozzle is a good choice for upgrade or replacement of older nozzles. All parts within a nozzle are interchangeable with other MKIII nozzles. Seals can be EPDM, Viton or Silicon for aqueous or organic use.
Tablet Coating Spray Nozzle
Variable Spray Width
Spray width can be remotely controlled and is easily adjusted allowing optimisation of tablet bed wetted areas. This feature minimises the risk of over wetting whilst maintaining the optimum nozzle distance from the tablet bed.
Total Droplet Control
Consistency - each FilmTech™ nozzle produces the
same droplet spectrum every time
Accuracy - the advanced technical capabilities allow
a closely controlled droplet spectrum
Adaptability - each liquid nozzle is available in a
size ranging from 0.8mm to 1.8mm
CSI MkIII Specification
Spray Nozzle Type
Airborne - Air Atomised
Spray Nozzle Liquid Tip Size Standard (Optional)
mm - 1.2 (0.8 / 1.8)
Solution Flow rate (Typical per nozzle)
ml/min - 50 - 150
Solution Viscosity (Typical per nozzle)
MPa - 5 - 350
Maximum Compressed Air Pressure
bar - 5.5
Compressed Air Consumption (maximum @ 4.0 bar)
Litres/min - 120
Nozzle Leaflet